How to buy cold welding machine? Macro move

There are many manufacturers and models of cold welding machines in the domestic market, but it is difficult for many users to have a systematic judgment method on how to choose a cold welding machine suitable for their own products. Here are some tips for you to buy a cold welding machine:

1. Repair efficiency

Because the repair efficiency of cold welding machine is lower than that of argon welding and electric welding, and now the labor cost is very high, when the repair effect is the same, the repair efficiency will be the first factor for you to choose a cold welding machine. The equipment parameters for welding repair efficiency mainly depend on the welding repair power. At present, most of the welding repair power in the market is between 600w-1000w.

The latest cold welding machine on the market belongs to Hongyu hb09-k3 cold welding machine. Its repair power is 3000W, which is the fastest repair efficiency of cold welding machine.

2. Chromatic aberration

The strength of a cold welding machine company and the strength of the technical team mainly depend on its professionalism and welding repair effect. The most important thing is the selection of welding rods and wires.

Hongyu cold welding machine company has a strong technical team to give you the best advice on the selection of welding wire.

3. Angle of power supply

The transformer output voltage of ordinary cold welding machine is unstable, which is prone to undercut and collapse. After the product is repaired by welding, the workpiece surface is rough.

The cold welding machine of Hongyu industry is 3000W inverter switching technology. Replace the traditional transformer. More stable voltage!

4. Control mode

The control mode of ordinary cold welding machine is analog control. There are some problems in this form of control. For example, there are many internal potentiometers, which are easy to be damaged, easy to cause a variety of faults, and the control mode is fuzzy and inaccurate

Hongyu cold welding machine is fully digital controlled. Compared with ordinary cold welding machines, this control method has accurate control and simple operation!

5. Anti interference ability

Ordinary cold welding machine is not equipped with anti-interference circuit, and the radiation is strong, which completely does not meet the national standard

Anti EMI and RFI circuits are set inside the Hongyu cold welding machine, which has small electromagnetic interference and radio frequency radiation, and meets the national standards

6. Electric gun

The structure setting of ordinary cold welding machine is unreasonable, the temperature rise is too high when the buyer uses it, and the internal components are easy to age

Hongyu cold welding machine is a self-developed and produced enterprise with reasonable structural design and comprehensive consideration for buyers. During use, the temperature rise is low and the components are not easy to age.