The portable EDM tap taking and breaking machine produced by our company is mainly applicable to the removal of broken taps, reamers, drill bits and screws in machining or production. The power of the tap taking and breaking machine is 800W, and its head can rotate at any angle to facilitate the processing of holes with different angles. The processing scope is: diameter hole, inclined hole, large span hole, anisotropic hole, groove, lettering and marking on the roll, etc. The equipment has the advantages of small volume, light weight, simple operation, stability and reliability and wide application range. It is especially suitable for taking out broken taps on large workpieces, and can punch and ream holes on alloy steel, quenched steel, cemented carbide and other difficult materials.

       Hb-c3 tap taking and breaking machine uses the spark generated when the hard metals such as tap and drill bit broken in the workpiece contact and short circuit with the electrode to quickly corrode the broken tap and other hard metals and split them into several small pieces, so as to remove the tap and other hard metals remaining in the workpiece and have no damage to the workpiece itself.

a) Portable design, convenient for use on various worktables;

b) The electrode is brass tube copper rod;

c) The principle of electric erosion is to take the material without damage, and the thread will not be damaged when removing the broken material;

d) Use ordinary water as working fluid;

e) It is very convenient to process the broken cone on the large workpiece;

f) The electromagnetic suction cup base is adopted, which has large magnetism and can be directly adsorbed to the workpiece for processing;

g) The working head can be 360 DEG; Adjustment;

h) Automatic feed processing, saving manpower;

● take out the tap, screw, drill bit, reamer, screw, plug gauge and other tools / tools broken in the workpiece.

● it can be processed on workpieces of various sizes and shapes.

● machining at various angular positions on the workpiece.

● machining non precision required holes (& plusmn; holes above 0.2).

● it is especially suitable for large workpieces that are difficult to be machined on EDM machine tools.